Product Description
Power Cube 110.19 ST – High-Flow Electric Hot-Water Pressure Washer with E-BOOST
The Power Cube 110.19 ST is a high-flow, fully electric hot-water pressure washer delivering up to 11.1 liters/minute (2.9 gpm) at an adjustable 70–150 bar (≈1,015–2,175 psi). With 22kW of total installed power — 19kW of in-pressure heating plus a 15kW pre-heating stage — it's built for high-throughput wash-down work that demands both volume and heat.
At the heart of the unit is Idroeletrika's patented E-BOOST system: an internal ~88-liter (23 gal) reserve tank pre-heats incoming water up to 50°C (122°F) before it reaches the main boiler. Pre-warming the water lets the boiler reach higher output temperatures using fewer kilowatts than a single-stage machine — more heat, lower draw.
Built entirely from stainless steel — AISI 304 body, panels, and boiler body, with replaceable 316L stainless heating elements — and backed by a 3-year warranty on the 304 boiler body. Electrical components are IP55-rated, and the hydraulic circuit includes a membrane pressure accumulator and an outlet pressure gauge. The unit rolls on non-marking wheels with a brake.
Each unit ships complete with a 25' high-pressure hose, high-pressure spray gun, 90cm lance, one fan-jet nozzle, one COA high-impact nozzle, quick-connect couplers, and an automatic hose reel. Compact at 75 × 110 × 80 cm (29.5 × 43.3 × 31.5 in) and ~105 kg (231 lb), with a 4 m (13 ft) power cord.
Available in 230V 3-phase (60Hz) or 400–480V 3-phase (50–60Hz). Other supplies on request.
A note on flow and temperature: This machine lets you trade flow rate for output temperature. At its highest flow (11.1 L/min) it produces up to 76°C (169°F); throttling down to 8.3 L/min (2.2 gpm) raises peak output to 84°C (183°F). Actual temperature also depends on the pre-heated inlet water and nozzle used. Because the boiler carries a 90°C (194°F) safety thermostat, we don't recommend chasing maximum temperature — if the cutoff trips, the machine shuts down to cool, interrupting work and returning inconsistent tank temperatures until it recovers. For steady hot-water output, run it within its rated range.
View and Download Product Brochure Here!
Other Details
- Additional Information:
Idroeletrika's ECO system is a complete range of “green” environmentally friendly electric powered hot-water pressure washers with electric boilers that heat the water under pressure, providing high-pressure hot-water output with low, medium and high flow-rates, ranging from 2.5-15 liters per minute. Unlike traditional pressure washers which use diesel to heat water, thereby generating and releasing harmful exhaust emissions into the environment; the ECO line of pressure washers eliminates this main defect, by using clean electricity to heat the water, fully respecting the environment, the health of workers as well as the inherently sensitive wine cellar environment. No longer must workers run the risk of contamination in the cellar from spilled diesel fuel or exhaust fumes from diesel powered motors while performing basic but critically important cleaning operations.
Utilizing a unique technology, the ECO line of pressure washers, first directs cold water into the pump, then flowing into the pressurized electric boiler where continuous heating occurs. The continuous heating of water enables workers to effectively clean in ways never thought possible with common high-flow pressure washers. The low and medium flow rate of the ECO line of pressure washers enable workers to safely clean indoors all surfaces including delicate components of machines, without the overwhelming splashback or exhaust fumes that typically occur while using standard high flow pressure washers. It is even possible for workers to get into a wine tank to clean the interior surfaces using a low or medium-flow ECO pressure washer. The high-flow rate machines enable the use of tank cleaning head and barrel cleaning head (spin wash) in combination with a ECO series pressure washer, for tank cleaning and barrel cleaning.
Machines are available in a variety of configurations (flow rate and Kw) to fit every unique situation.
